Trade Select™ VapourTech® Brane® VHP is used as a wall wrap behind fibre cement and timber cladding in most Australian climates.
NOTE: It is NOT recommended for this application in Climate Zone 1; select from our range of Class 1 and 2 Vapour Barrier products instead.
Trade Select™ VapourTech® Brane® VHP is available in 1.37 m and 1.5 m width rolls, and a convenient 2.74 m or 3.05 m width roll that halves installation time and reduces the amount of air gaps and joins in the wall system.
If installed behind non-absorbent claddings such as steel, provision should be given for adequate drainage of any trapped moisture.Light Wall Duty
Class 4 Vapour Permeable
Water Barrier and Air Permeable
Triple layer construction for durability
Low Flammability, suitable for all BALs in bushfire-prone areas
UV resistance - up to 30 days
Product Dimension
Nominal Thickness
0.38 mm
Dimension
3050 mm x 30 m (91.5 m²)
2740 mm x 30 m (82.2 m²)
1500 mm x 30 m (45 m²)
1370 mm x 30 m (41.5 m²)
Trade Select™ VapourTech® Brane® VHP is used as a wall wrap behind fibre cement and timber cladding in most Australian climates.
NOTE: It is NOT recommended for this application in Climate Zone 1; select from our range of Class 1 and 2 Vapour Barrier products instead.
Trade Select™ VapourTech® Brane® VHP is available in 1.37 m and 1.5 m width rolls, and a convenient 2.74 m or 3.05 m width roll that halves installation time and reduces the amount of air gaps and joins in the wall system.
If installed behind non-absorbent claddings such as steel, provision should be given for adequate drainage of any trapped moisture.Light Wall Duty
Class 4 Vapour Permeable
Water Barrier and Air Permeable
Triple layer construction for durability
Low Flammability, suitable for all BALs in bushfire-prone areas
UV resistance - up to 30 days
Product Dimension
Nominal Thickness
0.38 mm
Dimension
3050 mm x 30 m (91.5 m²)
2740 mm x 30 m (82.2 m²)
1500 mm x 30 m (45 m²)
1370 mm x 30 m (41.5 m²)
